9
Product Use:
All statements, technical information and recommendations
contained in this document are based up on tests or experience that 3M believes
are reliable. However, many factors beyond 3M’s control can affect the use and
performance of a 3M product in a particular application, including the conditions
under which the 3M product is used and the time and environmental conditions in
which the product is expected to perform. Since these factors are uniquely within
the user’s knowledge and control, it is essential that the user evaluate the 3M
product to determine whether it is fi t for a particular purpose and suitable for the
user’s method of application.
Warranty and Limited Remedy:
3M warrants this tool against defects in
workmanship and materials under normal operating conditions for one (1) year from
the date of purchase. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING
OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible
for determining whether the 3M tool is fi t for a particular purpose and suitable for
user’s application. User must operate the tool in accordance with all applicable
operating instructions, safety precautions, and other procedures stated in the
operating manual to be entitled to warranty coverage. 3M shall have no obligation
to repair or replace any tool or part that fails due to normal wear, inadequate or
improper maintenance, inadequate cleaning, non-lubrication, improper operating
environment, improper utilities, operator error or misuse, alteration or modifi cation,
mishandling, lack of reasonable care, or due to any accidental cause. If a tool or
any part thereof is defective within this warranty period, your exclusive remedy and
3M’s sole obligation will be, at 3M’s option, to repair or replace the tool or refund
the purchase price.
Limitation of Liability:
Except where prohibited by law, 3M will not be liable for
any loss or damage arising from the 3M product, whether direct, indirect, special,
incidental or consequential, regardless of the legal theory asserted, including
warranty, contract, negligence or strict liability.
Submitting a Warranty Claim:
Contact your dealer when submitting a warranty
claim in accordance with the restrictions listed above. Please note that all warranty
claims are subject to manufacturer’s approval. Be sure to keep your sales receipt
in a safe place. This must be submitted when fi ling a warranty claim, within 1 year
from the date of purchase. For additional assistance call 1-800-362-3550.
Product Repair after Warranty Has Expired:
Repair of 3M Abrasive Power tools
that are not under warranty is available through 3M or a 3M Authorized Tool Repair
Representative. Contact your 3M Abrasive Power Tool Distributor for details, or call
1-800-362-3550.
For 3M Product Information Call:
800-3M HELPS (800-364-3577) toll free
651-737-6501 direct dial
Abrasive Systems Division
3M Center
St. Paul, MN 55144-1000
www.3M.com/abrasives
© 3M 2021.
3M and Scotch-Weld are trademarks of 3M Company.
34-8715-6393-7
#
«F1» 1
-
2
EU DECLARATION OF CONFORMITY
28824-88566 030821
Name and address of the manufacturer and, where applicable, his authorised representative:
3M Co., Abrasive Systems Division
3M Center, Building 223-6N-02
St Paul, MN USA 55144
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Product model/product (product, type, batch or serial number):
Description:
3M™
Type 27 Angle Grinders, 1 5 HP, 12
,000, 115 mm
–
125 mm (4.5 in
–
5.0 in)
Model Number:
28824, 88566
Serial Number Range:
80000-00
–
81999-99, where the first 2 digits represent the design of the unit,
the next 3 digits represent the sequence of manufacture, and the final 2 digits represent the yr of manufacture.
Object of the declaration :
Grinder with associated accessories
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
Machinery Directive 2006/42/EC
References to the relevant harmonised standards used or references to the other technical specifications in
relation to which conformity is declared. References must be listed with their identification number and version
and, where applicable, date of issue:
Machinery Directive 2006/42/EC
EN ISO 12100:2010
EN ISO 11148-7:2013
EN ISO 28927-1:2009
EN ISO 15744:2009
List stds. and rev. dates
List stds. and rev. dates
«F1» 2
-
2
Where applicable, the notified body
Click to enter, name and number
performed
Click to enter, description of intervention
and issued the certificate:
Click to enter, name and certificate number
Where applicable, description of accessories and components, including software, which allow the radio equipment
to operate as intended and covered by the EU declaration of conformity:
Click to enter, description
Signed for and on behalf of:
03-08-2021
St. Paul, Minnesota, USA
Signature
Betty Z. Mei
Name of Signer
Technical Director
Title of Signer
Location of Technical File
Document Holder
Mr. Ivan Hristov - Hardware
Development Engineer, 3M Germany
GmbH Carl-Schurz-Str.1, 41453
Neuss Germany
Division/EBC/EBU
ASD Global Systems Lab, 3M
Central Europe Region
Phone
+49 2131 143058
Original Language: English
