3M Two Hand 6 in. ROS
6
Revision 052209
Abrasive Systems Division
3M Center, Building 223-6N-02
St. Paul, MN 55-000
www.3M.com/abrasives
© 3M 2009
3M, Stikit and Hookit are trademarks of 3M Company.
3-8703-059-
Product Use: All statements, technical information and rec-
ommendations contained in this document are based up on
tests or experience that 3M believes are reliable. However,
many factors beyond 3M’s control can affect the use and
performance of a 3M product in a particular application,
including the conditions under which the 3M product is used
and the time and environmental conditions in which the prod-
uct is expected to perform. Since these factors are uniquely
within the user’s knowledge and control, it is essential that
the user evaluate the 3M product to determine whether it is
fit for a particular purpose and suitable for the user’s method
of application.
Warranty and Limited Remedy: 3M warrants this tool
against defects in workmanship and materials under normal
operating conditions for one () year from the date of pur-
chase. 3M MAKES NO OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FIT-
NESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED
WARRANTY ARISING OUT OF A COURSE OF DEALING,
CUSTOM OR USAGE OF TRADE. User is responsible for
determining whether the 3M tool is fit for a particular purpose
and suitable for user’s application. User must operate the
tool in accordance with all applicable operating instructions,
safety precautions, and other procedures stated in the op-
erating manual to be entitled to warranty coverage. 3M shall
have no obligation to repair or replace any tool or part that fails due
to normal wear, inadequate or improper maintenance, inadequate
cleaning, non-lubrication, improper operating environment, improper
utilities, operator error or misuse, alteration or modification, mishan-
dling, lack of reasonable care, or due to any accidental cause. If a
tool or any part thereof is defective within this warranty period, your
exclusive remedy and 3M’s sole obligation will be, at 3M’s option, to
repair or replace the tool or refund the purchase price.
Limitation of Liability: Except where prohibited by law, 3M and
seller will not be liable for any loss or damage arising from the 3M
product, whether direct, indirect, special, incidental or consequen-
tial, regardless of the legal theory asserted, including warranty,
contract, negligence or strict liability.
Submitting a Warranty Claim: Contact your dealer when
submitting a warranty claim in accordance with the restrictions
listed above. Please note that all warranty claims are subject to
manufacturer’s approval. Be sure to keep your sales receipt in a
safe place. This must be submitted when filing a warranty claim,
within year from the date of purchase. For additional assistance
call -800-362-3550.
Product Repair after Warranty Has Expired: Repair of 3M Abra-
sive Power tools that are not under warranty is available through 3M
or a 3M Authorized Tool Repair Representative. Contact your 3M
Abrasive Power Tool Distributor for details, or call -800-362-3550.
EN ISO 12100-1:2003
EN ISO 12100-2:2003
Safety of machinery. Basic concepts, general principles for design-Basic
terminology and Technical principals
EN 792-8:2001
Hand-held non-electric power tools – Safety Requirements – Part 8: Sanders
and polishers
EN 983:1996
Safety of machinery. Safety requirements for fluid power systems and com
-
ponents - Pneumatics
EN ISO 14121-1:2007
Safety of machinery. Principles for risk assessment
EN ISO 28662-1:1992
Hand-held portable power tools – Measurement of vibrations at the handle-
Part 1: General
EN ISO 8662-8:1997
Hand-held portable power tools – Measurement of vibrations at the handle-
Part 8: Polishers and rotary, orbital and random orbital sanders
EN ISO 15744:2002.
Hand-held non-electric power tools. Noise measurement code. Engineering
method (grade 2)
Full Name of responsible person.
Stefan A. Babirad
Position: Technical Director
Signature: ……………………
Date: …………………………….
EC Declaration of Conformity
Manufacturers Name:
, Abrasive Systems Division
Manufacturers Address:
3M Center, Building 223-6N-02
St Paul, MN USA 55144.
Does hereby declare that the machinery described below complies with those applicable essential
health and safety requirements of the Machinery Directive 2006/42/EC; together with all
amendments to date.
Description:
3M™ Two-Hand Random Orbital Sander, 150 mm (6 in) X 10 mm (3/8 in) orbit diameter
Part Numbers:
28337
The following standards have either been referred to, or complied with, in full or in part as relevant:
