3M 33577 Operator’S Manual & Safety Instructions Download

Page: 6 / 84

Translation of Original Instructions

EXPLANATION OF SIGNAL WORD CONSEQUENCES

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury and/or

property damage .

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury and/

or property damage .

NOTICE:

Indicates a potentially hazardous situation, which, if not avoided, may result in property damage .

GENERAL POWER TOOL SAFETY PRECAUTIONS:

For multiple hazards, read and understand the safety instructions before installing, operating, repairing, maintaining or changing

accessories on, or working near the power tool . Failure to do so can result in serious bodily injury .

WORK AREA SAFETY

a)  Keep work area clean and well lit . Cluttered or dark areas invite accidents .
b)  Dust can be highly combustible . Keep work area clean .
c)  Keep bystanders away while operating a power tool . Distractions can cause you to lose control .

PERSONAL SAFETY

• As compressed air is used as the power source, it must be remembered that compressed air can be dangerous when used

incorrectly . The user should take time to read and understand these operating instructions fully .

• Immediately release the start trigger in the event of any disruption of pressure . Do not attempt to restart until the disruption

has been corrected .

•  Do not use the power tool if it has been damaged .
•  The tool RPM should be checked on a regular basis to ensure proper operating speed .
•  Never operate the tool with loose, broken or missing parts .
•  Do not carry the tool by the air hose . Always be careful to prevent the tool from being started when carrying the tool with the

air supply connected .

• This tool is not protected against hazards inherent in grinding and cutting operations, which require a guard, and no such

grinding and cutting products should ever be attached .

• Do not use damaged abrasives or wrong type of accessories .
• Take care to avoid entanglement with the moving parts of the tool with clothing, ties, hair, cleaning rags or loose hanging

objects . If entangled, stop air supply immediately to avoid contact with moving tool parts .

• Always use personal protective equipment . Always wear eye protection . Protective equipment such as gloves, dust mask,

non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries .

• Do not overreach . Keep proper footing, balance and grip at all times . This enables better control of the power tool in

unexpected situations .

•  Be aware of torque reaction developed by the sander .
•  Always ensure the material being worked is firmly affixed to avoid movement .
•  Do not allow persons to use this power tool if unfamiliar with these instructions or operation of the tool .
•  Always disconnect this tool from the air supply when attaching/adjusting/replacing abrasives and accessories or when

starting any maintenance/cleaning tasks .

• Whenever performing maintenance procedures, use care to avoid exposure to any hazardous substances deposited on the

tool as a result of work processes .

• If the tool appears to malfunction, remove from use immediately and arrange for service and repair .