12
Operation
(Continued)
Figure 3-2 – Adjustable Carton Ejector
WARNINGS
1.
Turn air supply off before performing any adjustments or maintenance on the machine.
2.
Turn air supply off when machine is not in use.
3.
The case former contains flap folders and sliding components that operate in rapid succes-
sion. Keep hands out of this area when machine is in operation.
4.
Failure to comply with these warnings could result in severe personal injury and/or equip-
ment damage.
Manual/Automatic Mode
The operator can control the box movement from the
case former to the case sealer by the manual/
automatic mode switch located on the left side of the
frame. Figure 3-1.
In the manual mode, (for top and bottom taping) the
operator must press the ejector button (Figure 3-2)
to cause the ejector to move the box forward into the
case sealer.
In the automatic mode, (for bottom taping only) the
box is moved forward by the ejector without operator
assistance.
Summary of Contents for 3M-Matic 300cf
