3
Important – In the event the following safety
labels are damaged or destroyed, they must
be replaced to ensure operator safety. A
label kit, part number 78-8119-6942-3 is
available as a stock item or individual labels
can be ordered. See Parts Illustration/List,
pages 36 and 37.
Important Safeguards
This safety alert symbol identifies
important safety messages in this
manual. READ AND UNDERSTAND THEM
BEFORE INSTALLING OR OPERATING
THIS EQUIPMENT.
The "Warning – Air Pressure" label, shown in
Figure 1-1, is attached next to the return stroke air
pressure regulator. The regulator is located behind
the pneumatic compartment cover and is factory
adjusted. No operator adjustment is required.
Figure 1-1 – Air Pressure Warning Label
The "Re-Set" label, shown in Figure 1-3, is
attached to the top of the adjustable carton ejector
next to the "Reset"push-button. The "Reset" push-
button must be pushed to restore air supply after
stopping machine with E-Stop switch.
Figure 1-2 – Emergency Stop Label
The "Emergency Stop" label, shown in Figure 1-2,
is attached to the top of the adjustable carton ejector
assembly around the E-Stop push-button. The label
reminds operators and casual personnel of the
function of this switch.
Figure 1-3 – Reset Label
Summary of Contents for 3M-Matic 300cf
