International - ENG
February 2021
3M-Matic
™
7000a-I / 7000a3-I Pro - Type 11700 Original Instruction
Page 17
Source
Document
for
all
related
Manuals/Translations
44-0009-2164-1 / ECO# 0078045
H
L
W
Figure 5-1
Figure 5-2
Figure 5-3
Figure 5-4
H
L
W
5.1 Shipment and Handling of
Packed Machine
- Store and ship the machine
within -25 to +55°C (-13 to 131°F),
At temperatures up to +70°C (158°F)
(but do not exceed 24 hours).
Do not expose the machine to
abnormal levels of shock/vibration.
- The machine is fixed on the
pallet with four (4) bolts and can
be lifted by using a fork truck.
- The package is suitable to travel
by land and by air.
- Optional sea freight package is
available.
Packaging Overall Dimensions
(Figure 5-1 and Specifications)
During the shipment it is possible
to stack a maximum of 2 machines
(Figure 5-2).
5.2 Packaging for Overseas Shipment
(Optional
-
Figure 5-3
)
The machines shipped by sea freight
are covered by an aluminum/
polyester/polythene bag which
contains dehydrating salts.
5.3 Handling and Transportation of
Uncrated Machine
The uncrated machine should not be
moved except for short distances and
indoors ONLY. Without the supporting
pallet, the machine is exposed to
damage and may cause injuries.
To move the machine use belts or
ropes, paying attention to place them
in the points indicated using care to
not interfere with the lower taping
head
(Figure 5-4).
5.4 Storage of Packed/Unpacked Machine
If machine is not used for a long period,
please take the following precautions:
- Store machine in a clean/dry place.
- If the machine is unpacked it is
necessary to protect it from dust.
- Do not stack anything over machine.
- It is possible to stack a maximum
of 2 machines (if in original packing).
5. Shipment-Handling-Storage-Transport
