22
4.3
"Special Conversion Cabinets"
The "Special Conversion Cabinets" are expansion cabinets for one specific pair size of old cabinets.
They include all frame support brackets, Self-Strip Blocks and block frames. The installation of the
4230-LF/RH - 2700/3600 Single Sided "Special Conversion Cabinet" is the same as the other RH/XP
Cabinets except this cabinet includes the SS1350-9T Frame. The cabinets are:
a.
Installing the 4220-KF/R-1800/2700 or 4230-LF/R-2700/3600 Single-Sided "Special
Conversion Cabinet"
1. If the Top Drop-Down Bracket was not attached to the existing frame during frame removal from
the old cabinet, install it with the AT&T or HUB position to the frame. Reuse the 1/4" bolts from
the Hub Cabinet and use the #10 self drilling screws for the AT&T frame.
2. Loosen the Top Mount Bracket and
Jumper Wire Trough in the cabinet so that
it can be adjusted to the top of the frame
and the Top Drop-Down Bracket.
4220-KF/RH-1800/2700
4230-K/XP-3600/5400
4230-LF/R-2700/3600
Hub
AT&T
Hub
Side
AT&T
Side
Top Drop-Down Bracket
Jumper Wire
Trough
Top Mount
Bracket