11
10.5 Wrap the gel sealant strip around the core and ground wires with a
slight tension.
Note:
Place ground wires and drop wires between layers in gel.
Insure wires have one layer of gel between them and cable
sheath. There should be at least 0.25" (6 mm) between wires.
10.4 Remove packaging from gel sealant strip.
10.3 Install gel end seal core 2" (51 mm) below the sheath opening. Pull
lips of seal, created by cutting and removing plug, around cables.
1
2
3
10.2 Slit gel end seal ports along the length of plugs for desired number
of cables to be installed and remove plugs.
Use plugs 1 and 2 for main cables and plugs 3 and 4 for branch or
terminal cables.
10.1 Cut and remove packaging from gel end seal core.
10.0
Sealing Collar Installation – 4608GW and 4608XL-GW
Obsolete
Document
