6
5.2
Install external ground wires to bonding connector studs and
run along the cables.
Note:
For external grounding of sealed copper plant, a solid
copper wire bond must be used. For internal bonding/
grounding, a stranded, braided or any combination of
bonding/grounding wire may be utilized.
5.0 Bonding and Grounding
5.1
Install bonding connectors per system practice. Bonds should
be placed so that the studs of the connectors are facing forward.
5.3
Insulate bonding connectors by wrapping with vinyl tape.
6.0 Splicing
6.1
Splice per company practice.
6.2
Splice in tail of a terminal block when required.
Obsolete
Document