background image

Electronics Materials Solutions Division

Interconnect Products

6801 River Place Blvd.

Austin, TX 78726-9000 USA 

Web 3M.com/interconnect 

Phone 1-800-810-8513

3M is a trademark of 3M Company.

Used under license by 3M subsidiaries and affiliates.

All other trademarks are properties of their 

respective owners.

Regulatory:

 For regulatory information about this 3M product, visit

3M.com/regs

. For safety and regulatory information on Carpenter Model 47 Cable 

Stripper, contact the manufacturer directly using the contact information found on www.carpentermfg.com.

Technical Information:

 The technical information, recommendations and other statements contained in this document are based upon tests or experience  

that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.

Product Use:

 Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a 

particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M 

product and determining whether it is fit for a particular purpose and suitable for user’s method of application. 

Warranty, Limited Remedy, and Disclaimer:

 Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 

3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES 

OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR 

FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE 

OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or 

refund of the purchase price. 

Limitation of Liability:

 Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, 

special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.

Please recycle. Printed in USA.  

©3M 2017. All rights reserved.  

Issued: 7/17 12579HB  

78-9102-5431-3

Over 50 years of interconnect innovation

3M

 Round Conductor Flat, Controlled Impedance Cable, 7700 Series is the latest in a long line of 

3M firsts in electronics cabling technology, including the first mass-termination interconnect system; 

the first 64 wire termination; color-coded flat cabling; the first IDC solution for I/O applications;  

foldable twin axial cable and more – all designed to enable manufacturers to improve device  

performance, speed assembly and add more value to their products.

3M

 Round Conductor Flat, Controlled Impedance Cable, 7700 Series

Summary of Contents for 7700 Series

Page 1: ...icrometer on handle number two and bushings were added for accuracy and tolerance The blade orientation was flipped and the angle was sharpened to 45 to better pierce through the 3M cable 7700 series flexible foil covering A strip length stopper has been added to save time with cable alignment Tools needed Figure 2 Prepared cable Figure 1 Cut cable Set blade depth See Figures 4 and 5 a Lock a test...

Page 2: ...ision utility knife for clearance when terminating to 3M Ribbon Cable Wiremount Socket Assembly 451 Series optional Step 4 Slice blades closed using Handle 2 Step 5 Rotate Handle 3 to remove covering Step 6 Reset Handles 2 then 3 then 1 to starting positions Step 7 Remove sample from upgraded Carpenter Model 47 Cable Stripper and carefully peel off any remaining foil covering as necessary Step 8 I...

Page 3: ...ww carpentermfg com Guidelines The following tips are recommended when preparing and terminating the 3M cable 7700 series Preparation Take care to keep the new cut edge of 3M cable 7700 series perpendicular to the outer edge of the cable for easier termination to connectors Do not allow blades to slice or scrape into polyolefin insulation Cycling step five 2 3 times may aid removing the foil cover...

Page 4: ...M product packaging or product literature 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product 3M MAKES NO OTHER WARRANTIES OR CONDITIONS EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DE...

Reviews: