(English)
1
W
WARNING
This respirator helps protect against certain particles.
Misuse may result in sickness or death.
For correct use, consult supervisor and
these
User Instructions
, or call 3M in U.S.A., 1-800-247-3941. In Canada, call Technical Service at 1-800-267-4414.
IMPORTANT
Before use, wearer must read and understand these
User Instructions
. Keep these instructions for reference.
Use For
Particles such as those from processing minerals, coal, iron ore, cotton, flour, and certain other substances. Liquid- or oil-based particles from
sprays that
do not
also emit harmful vapors. Nuisance-level acid gases such as sulfur dioxide, hydrogen fluoride and/or chlorine. (Nuisance-level
acid gas refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower.) Follow all
applicable local regulations. For additional information on 3M use recommendations for this class of respirator please consult the 3M Respirator
Selection Guide found on the 3M Personal Safety Division (PSD) website at www.3M.com/respiratorselector or call 1-800-243-4630 in U.S.A. In
Canada, call 1-800 267-4414.
Do Not Use For
Do not use for paint spray; vapors; asbestos; sandblasting; or particulate concentrations that exceed either 10 times the occupational exposure
limit or applicable government regulations, whichever is lower. In the U.S., do not use when the United States Occupational Safety and Health
Administrations (OSHA) substance-specific standards - such as those for arsenic, asbestos, cadmium, lead in the construction industry, or
4,4’-methylene dianiline (MDA) - specify other types of respiratory protection. Do not use when acid gas concentrations exceed the OSHA PEL or other
applicable exposure limits, whichever is lower. This respirator does not supply oxygen.
Biological Particles
This respirator can help reduce inhalation exposures to certain airborne biological particles (e.g.mold,
Bacillus anthracis, Mycobacterium tuberculosis,
etc.) but cannot eliminate the risk of contracting infection, illness or disease. OSHA and other government agencies have not established safe
exposure limits for these contaminants.
Use Instructions
1. Failure to follow all instructions and limitations on the use of this respirator and/or failure to wear this respirator during all times of exposure can
reduce respirator effectiveness and may result in sickness or death.
2. Before occupational use of this respirator, a written respiratory protection program must be implemented meeting all the requirements of OSHA 29
CFR 1910.134 such as training, fit testing, medical evaluation, and applicable OSHA substance specific standards. In Canada, CSA standard Z94.4
requirements must be met and/or requirements of the applicable jurisdiction, as appropriate.
3. The particles which can be dangerous to your health include those so small that you cannot see them.
4. Leave the contaminated area immediately and contact supervisor if dizziness, irritation, or other distress occurs.
5. Store the respirator away from contaminated areas when not in use.
6. Inspect each respirator before each use to ensure that it is in good operating condition. Examine all the respirator parts for signs of damage
including the two headbands, attachment points and noseclip. The respirator should be disposed of immediately upon observation of damaged or
missing parts. Filtering facepieces are to be inspected prior to each use to assure there are no holes in the breathing zone other than the punctures
around staples and no damage has occurred. Enlarged holes resulting from ripped or torn filter material around staple punctures are considered
damage. Immediately replace respirator if damaged. Staple perforations do not affect NIOSH approval.
7. Dispose of used product in accordance with applicable regulations.
Use Limitations
1. This respirator does not supply oxygen. Do not use in atmospheres containing less than 19.5% oxygen.
2. Do not use when particulate concentrations of contaminants are immediately dangerous to life and health, are unknown or exceed 10 times the
permissible exposure limit (PEL) or according to specific OSHA standards or applicable government regulations,whichever is lower. Do not use
when acid gas concentrations exceed the OSHA PEL or other applicable exposure limits, whichever is lower.
3. Do not alter, abuse or misuse this respirator.
4. Do not use with beards or other facial hair orother conditions that prevent a good seal between the face and the sealing surface of the respirator.
5. Respirators can help protect your lungs against certain airborne contaminants, however, they will not prevent entry through other routes such as
the skin, which would require additional personal protective equipment (PPE).
6. This respirator is designed for occupational/professional use by adults who are properly trained in their use and limitations.This respirator is
not designed to be used by children.
7. Individuals with a compromised respiratory system, such as asthma or emphysema, should consult a physician and complete a medical evaluation
prior to use.
Particulate Respirator R95
3
User Instructions
8246
