3
Safety messages contained in this manual
The following safety messages appear in this manual:
WARNING
To reduce the risks associated with hazardous voltage contained within the
power supply, which, if not avoided, could result in death or serious injury:
Do not use the power supply if the case or cord are damaged;
Do not use power supply in outdoor or wet environments;
Do not attempt to service or repair the RFID circuitry or power supply — no user
serviceable parts inside.
CAUTION
To reduce the risks associated with repeated body movement, which, if not
avoided, may result in minor or moderate injury:
Operation of the Tracking Pad may involve repeated body movements. To
minimize possibility of Repetitive Stress Injury, avoid prolonged repetitive
movements, rest when becoming fatigued, and when possible, alternate job
functions with other people. It is recommended that the user avoid awkward
reaching for items.
To reduce the risks associated with environmental contamination from circuit
boards containing lead-bearing solder within the Tracking Pad and 3M RFID
Reader, which, if not avoided, may result in minor or moderate injury:
At the end of service life, dispose of the
Tracking Pad, RFID Reader,
and
power
supply
according to federal, state, and local requirements.
IMPORTANT NOTE
To reduce the risks of damaging the RFID Reader, DO NOT over tighten the
Tracking Pad cable connection:
Tighten this connection finger tight (as tight as possible using only your fingers).
To help ensure maximum Tracking Pad performance:
Place the Tracking Pad at least 2 in. from any metal surface.
