3M
™
Personal Safety Division | 3M
™
Particulate Respirators 8825+ and 8835+
Please recycle. Printed in the UK. 3M is a trademark of the
3M company. Used under licence by 3M subsidiaries and affiliates.
© 3M
2020.V2. All rights reserved.
Cleaning Instructions
If the respirator is to be used for more than one shift the face
seal/gasket must be cleaned at the end of each shift using the
3M 105 face seal wipe.
DO NOT immerse product in water.
Store cleaned respirator in clean, airtight container.
Disposal
Contaminated products should be disposed as hazardous
waste in accordance with national regulations.
Marking
R =
Reusable
D =
Meets the clogging requirements
End of Shelf Life. Date format: YYYY/MM/DD
Temperature Range
Maximum Relative Humidity
Name and address of Legal Manufacturer
Dispose of in accordance with local regulations
Approvals
The Certificate and Declaration of Conformity available at the
following website: www.3M.com\Respiratory\certs
Made in UK, in an ISO 9001:2008, ISO 14001:2004 and
OHSAS 18001:2007 certified plant.
Important Notice
The use of the 3M product described within this document assumes that the user has previous experience of this type of product and that it will
be used by a competent professional. Before any use of this product it is recommended to complete some trials to validate the performance of
the product within its expected application.
All information and specification details contained within this document are inherent to this specific 3M product and would not be applied to
other products or environment. Any action or usage of this product made in violation of this document is at the risk of the user.
Compliance to the information and specification relative to the 3M product contained within this document does not exempt the user
from compliance with additional guidelines (safety rules, procedures). Compliance to operational requirements especially in respect to the
environment and usage of tools with this product must be observed. The 3M group (which cannot verify or control those elements) would not be
held responsible for the consequences of any violation of these rules which remain external to its decision and control.
Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause, excluding
any other warranty or compensation.
Distributed by Fisher Scientific. Contact us today:
