6
9681 Clipper Specifications
Motor voltage:
3.6 volt DC
Current without load:
1.0 amps max.
Current with full load:
1.3 amps max.
RPM:
5500‑6500
Power adapters/charge circuits:
All power adapters/charge circuits are 100‑240 VAC, 50‑60Hz
Charging time:
4 hours initial, 4 hours thereafter
Battery operating time:
~120 minutes
Battery:
Lithium‑Ion (Li‑ion)
Clipper weight (with blade):
180 grams (6.7 oz)
Clipper dimensions (with blade): 15.5 cm (6.1 in.) length
4.3 cm (1.69 in.) diameter
THE DEVICE HAS BEEN TESTED IN ACCORDANCE WITH IEC 60601‑1 EDITION
3.1 (MEDICAL – GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL
PERFORMANCE) AND IEC‑60601‑1‑2 EDITIONS 3 AND 4 (COLLATERAL
STANDARD‑ELECTROMAGNETIC DISTURBANCES)
This device complies with the requirements of European Medical Device Directive 93/42/EEC.
ELECTROMAGNETIC ENVIRONMENT GUIDANCE
ELECTROMAGNETIC EMISSION
The 3M™ Surgical Clipper Professional, 9681 is intended for use in the electromagnetic
environment specified below. The customer or user of the 3M™ Surgical Clipper Professional,
9681 should ensure that it is used in such an environment.
Emissions Test
Compliance Level
Electromagnetic Environment – Guidance
RF Emissions
CISPR 11
Group 1
Model 9681 uses RF energy only for its internal
function. Therefore, its RF emissions are very low
and are not likely to cause any interference in nearby
electronic equipment.
RF Emissions
CISPR 11
Class B
3M™ Surgical Clipper Professional, Model 9681 is
suitable for use in all establishments, including
domestic establishments and those directly
connected to the public low‑voltage power
supply network that supplies buildings used for
domestic purposes.
Harmonics
IEC 61000‑3‑2
Class A
Flicker
IEC 61000‑3‑3
N/A
