3M Accuspray 16580, Owner'S Manual

7

ENGLISH

IMPORTANT NOTE:

 The noise and vibration values stated are from laboratory testing in conformity with stated codes and 

standards and are not suffi  cient risk evaluation for all exposure scenarios. Values measured in a particular work place may 
be higher than the declared values. The actual exposure values and amount of risk or harm experienced to an individual 
is unique to each situation and depends upon the surrounding environment, the way in which the individual works, the 
particular material being worked, work station design, as well as upon the exposure time and the physical condition of 
the user. 3M cannot be held responsible for the consequences of using declared values instead of actual 
exposure values for any individual risk assessment.

Spray Gun Overview

3M™ Accuspray™ Spray Guns were designed from the inside out for the eff ective, effi  cient, and economical application of 
paints, adhesives, coatings and fi nishes. This spray gun has a large spray pattern with very low overspray. The soft, tight, 
adjustable pattern with complete atomization results in a high fi nish quality and absolute control. Each ultra-light weight 
spray gun is designed for easy handling, reliability and durability and for minimum maintenance costs. Combine your 
3M™ Accuspray™ Spray Gun with the 3M™ PPS™ Paint Preparation System and enjoy additional savings of time and 
cleaning solvents.

3M™ Accuspray™ Spray Gun is for professional use only. Hazards can occur from equipment misuse. Any misuse of the 
equipment or accessories, such as over pressurizing, modifying parts, using incompatible chemicals and fl uids, or using 
worn or damaged parts can cause serious bodily injury, fi re, explosion or property damage. 

Read and follow all Safety 

Statements and Instructions.

CONTENTS

Unpacking

Remove the components from the box. Inspect for concealed damage and/or missing items. If you discover any damage 
and/or missing pieces, contact your distributor immediately.

Your 3M™ Accuspray™ Spray Gun Kit could include one or more of the following, depending on the kit that was purchased:
•  1 Spray Gun Body
•  1 Air Flow Control Valve 
•  1.2 mm atomizing head
•  1.3 mm atomizing head
•  1.4 mm atomizing head
•  1.8 mm atomizing head

•  2.0 mm atomizing head
•  10 Color Identifi cation Clips (2 each of 5 colors)
•  PPS™ Standard Size Mixing Cup and Collar
•  PPS™ Standard Size Lids and Liners
•  PPS™ Sealing Plugs
•  PPS™ Generic Mix Ratio Insert

3M™ Accuspray™ Spray Gun

The 3M™ Accuspray™ Spray Gun is for use with compressed air 
systems and features a black composite* body, 13 scfm (370.5 L/min) 
air consumption and 1/4” (1/4” BSP) air inlet.

Maximum inlet pressure with full trigger pull** 
1.2 mm and 1.3 mm nozzles = 24 psi (1.65 bar)
1.4 mm, 1.8 mm, 2.0 mm nozzles = 20 psi (1.4 bar)

*  Product material compatibility information available upon request.
**  Maximum inlet pressure will yield approximately 10 psi (0.69 bar) 

at the air cap.