6
Cut the used micro-modules in the middle (Fig.29).
Coil the uncut fibres (Fig.30) and maintain the bundle at the proper location, behind the black tabs (Fig.31).
Secure the bundle of uncut fibres by using the supplied piece of Scotch flex™ (cut 3 pieces) (Fig.32 & 33).
7.
Fibres routing
7.1.
Description of the supplied accessories
Fibres are maintained along their way in the organizer by red colored plastic holders which must be installed on plastic
pins, located at particular areas of the organizer. These red holders should be placed by using the red colored plastic
stick (Fig.34).
When not used, the red set must be clipped on the clear cover of the last installed splicing tray (Fig.3
5
).
Tool (red stick)
Pads (red holders)
Stick’s storage
(After its first use)
Coiling of the bundle Fig.33
3
™
Scotch Flex
Fig.32
Store the micro-modules Fig.31
Insert the slack of micro-modules
Fig.27
Clipping the double entry
Fig.28
Coil the micro-modules Fig.30
Set of accessories Fig.34
Set of accessories on last tray Fig.35
CLICK!
High capacity ≥ 96 Fibres
Fig.26
Cut the micro-module at the middle Fig.29
=
=