![background image](http://html1.mh-extra.com/html/3m/charge-analyzer-711/charge-analyzer-711_quick-start-manual_3158023020.webp)
3M™ Model 711 Digital Conversion Station
Quick Start Guide
20
©3M June 2000
13
. Rotate the stop lever (counter-clockwise) on the supply roll shaft until the stop lever is in the
DOWN
position (
Figure 28
).
Figure 28: Rotating the Stop Lever to Down Position
14. Place the tag dispenser switch in the
ON
(up) position (Figure 29).
Figure 29: Setting the Tag Dispenser Switch to ON
15. The dispenser automatically initializes and the dispenser motor operates until a tag is
dispensed through the feeder opening (
Figure 30
).
Figure 30: Tag Dispensed Through Feeder Opening
13.
rotate stop lever
14.
15.