15
78-8124-5866-5-E
3M
™
Cold Shrink QT-lll Silicone Rubber Three Core Inverted Skirted Termination
with High-K Stress Relief
6.3 Secure rejacketing sleeve with two half-lapped layers of electrical grade vinyl tape (Figure 20). Start
taping 0.75" (19 mm) over rejacketing sleeve, extend 0.25" (6 mm) over cable metallic shield and return
to starting point.
Note: Do not exceed 0.25" (6 mm) overlap on 3M
™
EMI Copper Foil Shielding Tape 1181 strip.
0.75" (19 mm)
0.25" (6 mm)
Electrical Grade Vinyl Tape
Rejacketing Sleeve
Figure 20
6.4 Place a termination installation marker tape at Dimension [M] measured from semi-con leading edge as shown
(Figure 21).
Kit Number
Dimension M
7620-S-2-INV-3G
4.0" (102 mm)
7621-S-2-INV-3G
5.0" (127 mm)
7622-S-2-INV-3G
5.0" (127 mm)
7693-S-4-INV-3G
5.0" (127 mm)
7695-S-4-INV-3G
5.0" (127 mm)
[M]
Marker Tape
Figure 21