14
78-8124-5866-5-E
3M
™
Cold Shrink QT-lll Silicone Rubber Three Core Inverted Skirted Termination
with High-K Stress Relief
6.0 Install 3M Cold Shrink QT-III Termination Assemblies
6.1 Prepare cable phase legs according to dimensions shown (Figure 18).
NOTE: It is imperative to remove all remnants of the semi-con layer, even if the semi-con layer comes off as one layer.
There should not be any remaining black areas, or particles, on the cable insulation layer.
A
*
[B]
C
D
Rejacketing Sleeve
Figure 18
Kit Number
Dimension A
Dimension B*
Dimension C
Dimension D
7620-S-2-INV-3G
6.25" (159 mm)
Lug + growth
1.5" (38 mm)
0.75" (19 mm)
7621-S-2-INV-3G
6.25" (159 mm)
Lug + growth
2.5" (64 mm)
1.25" (32 mm)
7622-S-2-INV-3G
8.5" (216 mm)
Lug + growth
2.5" (64 mm)
1.25" (32 mm)
7693-S-4-INV-3G
12.0" (305 mm)
Lug + growth
2.5" (64 mm)
1.25" (32 mm)
7695-S-4-INV-3G
12.0" (305 mm)
Lug + growth
2.5" (64 mm)
1.25" (32 mm)
* [B] = Lug or connector barrel depth. Allow for crimp growth when using aluminum lugs or connectors.
6.2 Secure cable copper shield ends with 3M
™
EMI Copper Foil Shielding Tape 1181 strip (Figure 19).
Rejacketing Sleeve
3M
™
EMI Copper Foil Shielding Tape 1181 strip
Figure 19
