6
78-8124-5866-5-E
3M
™
Cold Shrink QT-lll Silicone Rubber Three Core Inverted Skirted Termination
with High-K Stress Relief
3.5 Fill one armor valley section with tightly-wrapped layers of Scotch
®
Electrical Shielding Tape 24 (Figure 4).
3.6 Secure ground braid assembly to cable armor using large constant-force spring (Figure 4). Once spring has
been applied, cinch (twist with hand) to tighten.
3.7 Apply one half-lapped layer vinyl tape over large constant-force spring and cable armor (Figure 4).
Note: Apply vinyl tape to hold down ground strap (Figure 4).
Vinyl Tape
Scotch
®
Electrical Shielding Tape 24
Fill To Level Of Armor High Points
Large Constant-Force Spring
Vinyl Tape
Figure 4
