![background image](http://html1.mh-extra.com/html/3m/dbi-sala-2108406/dbi-sala-2108406_user-instruction-manual_443975010.webp)
10
5.2 ANNUALLY:
The Fixed Beam Anchor must be formally inspected by a competent person
3
other than the user at least
annually. Record the results on the inspection label, in an inspection log, or use the i-Safe inspection web portal to
maintain inspection records.
5.3 DEFECTS:
If inspection reveals an unsafe or defective condition, remove the Fixed Beam Anchor from service
immediately and destroy it, or contact 3M regarding replacement or repair.
;
Authorized Repairs Only
:
O
nly 3M or parties authorized in writing my make repairs to this equipment.
5.4 ProDUCT LIFE:
The functional life of the Fall Arrest System is determined by work conditions and maintenance. As long
as the product passes inspection criteria, it may remain in service.
6.0 MAINTENANCE, SERVICING, STORAGE
6.1 CLEANING:
Periodically clean the Fixed Beam Anchor’s metal components with a soft brush, warm water, and a mild
soap solution. Ensure parts are thoroughly rinsed with clean water.
6.2 SErVICE:
Only 3M or parties authorized in writing by 3M may make repairs to this equipment. If the Fixed Beam Anchor
has been subject to fall force, it must be removed from service immediately, clearly marked “DO NOT USE”, and then
destroyed. If inspection reveals unsafe or defective conditions, remove the system from service and contact 3M regarding
replacement or repair.
6.3 STorAGE AND TrANSPorT:
When not in use, store and transport the Fixed Beam Anchor and associated fall
protection equipment in a cool, dry, clean environment out of direct sunlight. Avoid areas where chemical vapors may
exist. Thoroughly inspect components after extended storage.
7.0 LABELS
Figure 11 illustrates labels on the Fixed Beam Anchor. Labels must be replaced if they are not fully legible.