6
DBI-SALA connectors (snap hooks and carabiners) are designed to
be used only as speci
fi
ed in each product’s user instructions. See
Figure 3 for inappropriate connections. DBI-SALA snap hooks and
carabiners should not be connected:
A.
To a D-ring to which another connector is attached.
B.
In a manner that would result in a load on the gate.
NOTE:
Large throat opening snap hooks should not be connected to
standard size D-rings or similar objects which will result in a load on
the gate if the hook or D-ring twists or rotates. Large throat snap hooks
are designed for use on
fi
xed structural elements such as rebar or cross
members that are not shaped in a way that can capture the gate of the
hook.
C.
In a false engagement, where features that protrude from the
snap hook or carabiner catch on the anchor, and without visual
confirmation seems to be fully engaged to the anchor point.
D.
To each other.
E.
Directly to webbing or rope lanyard or tie-back (unless the
manufacturer’s instructions for both the lanyard and connector
specifically allows such a connection).
F.
To any object which is shaped or dimensioned such that the
snap hook or carabiner will not close and lock, or that roll-out
could occur.
2.4 SUPPORT STRUCTURE STRENGTH:
The support structure
to which the winch is installed must meet minimum strength
requirements stated in section 3.4
Figure 3 - Inappropriate Connections
netzerotools.com
netzerotools.com
