Table 2 – Inspection and Maintenance Log
Serial Number(s):
Date Purchased:
Model Number:
Date of First Use:
Instructions:
Record the results of each inspection on copies of this checklist. Additional copies of this checklist can be
printed from the Adobe Acrobat PDF version this manual. (www.3M.com/FallProtection)
Inspection Date:
Inspected By:
Components:
Inspection:
(See Section 1 for
Inspection Frequency
)
User
Competent
Person
Inspection
Notes:
Glyde-Saf HD Fall
Arrest System
components.
(See Figure 2)
Inspect entire system for damage, deformation, corrosion, or rust. Look for
cracks, bends, dents, or wear that could affect strength and operation of
the system.
X
X
Confirm that End Stops are installed at each end of the Glyde-Saf HD Fall
Arrest System. See Section 3.2 Assembly of the Glyde-Saf HD Fall Arrest
System.
X
X
Visually inspect fasteners that secure the Glyde-Saf HD Fall Arrest System
Trolley Rail Tracks to the intermediate brackets.
X
X
Inspect the Trolley Rail Tracks for structural defects. Rail Tracks must be
straight without any bends or dents. Trolley wheels must roll freely in the
rail. Remove debris and replace damaged components as needed.
X
X
Inspect the joints between Trolley Rail Tracks for structural defects or
damage including bends, cracks, corrosion, etc.
X
Inspect fasteners that secure the joints between Trolley Rail Tracks. Ensure
fasteners are torqued to 60 ft*lbs (81 Nm).
X
Inspect all other fasteners. Ensure that 3/4 in bolts are torqued to
130 ft*lbs (176 Nm). Re-torque as necessary.
Trolley
Remove and inspect Trolley for damage. Trolley wheels should spin freely
and show minimal wear. Replace Trolley wheels as needed.
X
Labels
Verify that all labels are securely attached and are legible (see
“Labels”
)
X
X
PFAS and Other
Equipment
Additional Personal Fall Arrest System (PFAS) equipment (harness, SRL,
etc) that are used with the Flexiguard Glyde-Saf HD Fall Arrest System
should be installed and inspected per the manufacturer’s instructions.
X
X
IMPORTANT:
Extreme working conditions (harsh environment, prolonged use, etc.) may require more frequent inspections. If you have
questions on the use, care, or suitability of this equipment for your application, please contact 3M Fall Protection.
Corrective Action/Maintenance:
Approved By:
Date:
Corrective Action/Maintenance:
Approved By:
Date:
Corrective Action/Maintenance:
Approved By:
Date:
Corrective Action/Maintenance:
Approved By:
Date:
Corrective Action/Maintenance:
Approved By:
Date:
Corrective Action/Maintenance:
Approved By:
Date:
Corrective Action/Maintenance:
Approved By:
Date:
Corrective Action/Maintenance:
Approved By:
Date:
Corrective Action/Maintenance:
Approved By:
Date:
Summary of Contents for DBI SALA FLEXIGUARD Glyde-Saf HD System
Page 3: ...3 6 A B A B 50 ft 15 2 m 6 ft 1 8 m 6 ft 1 8 m 7 8 ...
Page 4: ...4 9 ...
Page 13: ......
