44
3M™ Digital WallDisplay
© 3M 2004. All Rights Reserved.
E
N
G
L
IS
H
Maintenance
Resetting Lamp Hours
Please do the following within 10 minutes of turning power on after you replace the lamp.
1. Press the
Menu Keypad
or the
Menu
button on the remote control and use the
Disk Pad
to scroll down to
the
Tools
menu.
2. In the
Tools
menu, scroll down the pop-up list to
Usage/Hrs
to display the total operating time of the
lamp.
3. Select
Lamp Reset
from the next pop-up list.
4. Select
Exit
.
Note: Do not reset the lamp hours if the lamp cartridge was not changed. This can damage internal
components.
Important Note: This lamp contains mercury. Don’t throw lamp cartridge in the trash. Dispose of the
lamp cartridge in accordance with your respective governmental agencies for hazardous
waste. For disposal information in the US, contact the Electronic Industries Alliance at
www.lamprecycle.org. In Canada contact the Electronic Product Stewardship Canada at
www.wpsc.ca.
