34
3M
™
Digital Wall Display
© 3M 2005. All Rights Reserved.
E
N
G
L
IS
H
Using the 3M Wall Display as a Copyboard
Using Projection Mode
Note: If you do not have the eBeam
™
software installed on your computer, you can install it from the 3M
Digital Wall Display CD-ROM.
1. Connect the VGA cable from the VGA/
Monitor port on the computer to the VGA
port on the Digital Wall Display.
2. Connect the USB cable from the USB port
on the computer to the Computer–USB port
on the Digital Wall Display.
3. Connect the PC audio cable from the
headphones jack on the computer to either
of the Audio In–Computer jacks on the
Digital Wall Display.
4. Press the On/Off button on the Digital Wall
Display to turn on the lamp.
Note: If you are using a laptop, toggle the display
function by using one of the following methods:
Fn +
or Fn + LCD/CRT.
5. Double-Click the eBeam desktop icon on
your computer to launch the whiteboard
software.
6. Click the Calibrate button in the 3M Digital
Wall Display calibrate dialog box.
7. Tap each of the highlighted targets with the
interactive stylus.
�
