background image

 

Important Notice:

All statements, technical information, and recommendations related to 3M’s products 

are based on information believed to be reliable, but the accuracy or completeness is not 

guaranteed. Before using this product, you must evaluate it and determine if it is suitable 

for your intended application. You assume all risks and liability associated with such use. 

Any statements related to the products which are not contained in 3M’s current publica-

tions, or any contrary statements contained on your purchase order shall have no force or 

effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Limited Product Warranty:

All 3M products, locating instruments (except accessories), manufacture dated test 

leads, and rechargeable batteries will conform to 3M’s published specifications and 

will be free from defects in material and manufacture for a period of twelve (12) months 

from the date of purchase. Dry cell batteries included in any of 3M’s products are 

warranted only to the extent the battery manufacturer determines such batteries are 

covered by its warranty. Accessories for locating instruments are warranted for ninety 

(90) days after purchase. 3M’s obligations and liability under this warranty are limited 

to repairing, replacing or refund of the purchase price, at 3M’s option, any of 3M’s 

products which, after normal and proper usage, are determined by 3M to be defective. 

This warranty does not extend to any of 3M’s products which have been subjected to 

misuse, neglect, accident or improper applications, nor shall it extend to products which 

have been repaired or substantially altered outside 3M’s manufacturing or repair facility, 

nor to any associated instruments, equipment or apparatus. Before utilizing any of 3M’s 

products, BUYER should determine the suitability of the product for BUYER’S intended 

use. 

3M MAKES NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING 

ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 

PURPOSE.

 In no case shall 3M be liable for any direct, indirect, special, incidental, or 

consequential damages based upon breach of warranty, breach of contract, negligence, 

strict liability or any other legal theory. This limitation does not apply to claims for 

personal injury.

3

Electrical Markets Division

Austin, TX 

1-800-200-0265  

FAX: 1-877-601-1305

www.3M.com/dynatel 

Please Recycle. Printed in USA.

© 3M 2019. All Rights Reserved.

78-9237-1692-8

This is the EU symbol for equipment that is covered 
under the Waste from Electrical and Electronic 
Equipment (WEEE) directive per CENELEC 
Specification 5041. It indicates that certain products 
should not be discarded in the trash, but rather 
should be recycled.  This applies to all electronic 
pluggable and battery powered products.

This is the EU symbol for equipment that is covered under 

the Waste from Electrical and Electronic Equipment 

(WEEE) directive per CENELEC Specification 5041. It 

indicates that certain products should not be discarded in 

the trash, but rather should be recycled. This applies to all 

electronic pluggable and battery powered products.

3M and Dynatel are trademarks of 3M Company.

Summary of Contents for Dynatel 2273M-iD Series


















Reviews: