Operation
Section 1
Page 31
RFL Example 3, continued
Fault Locate – Multiple Gauge
5. Hookup and measurement:
Strap
Test
Set
DTS = 5046 ft or 1721 m
DTF = 255 ft or 76 m
STF = 4791 ft or 1645 m
DTS
DTF
STF
DTF=255 ft/76 m Sec. 2
STF=4791 ft/1645 m
DTS=5046 ft/1721 m
DTS 5046 ft or 1721 m
Fault resistance, strap
checks
Test set, straps hookup
instruction
Stored setups –
continue with test
Continue test
Select hookup:
separate good pair
End
of Test
In the field, use the arrow
keys here to view the rest of
the instructions and continue
making the hookup.
The stored setups display
should say “multiple gauge.”
In this example, the display
shows that the fault is in
section 2.
continued from previous page...
Additional message,
if any
The numbers displayed may
vary due to variations in the
resistors in the Cable Self Test
Circuit. See page 85 for limits.
