30
087-0020 REV
E
1/4 Turn
Twist and Lock Accessories
Designed for quick, easy installation and removal from your GasPlus sensor, Twist-and-
Lock accessories connect directly to the standard end cap and help make your gas
detection system easier to use.
Rain Shield / Splashguard ( # 074- 0305) - not shown
Provides protection from wet weather and hose-downs. Teflon
®
construction permits use with both reactive (such as hydrogen fluoride,
hydrogen chloride, and ammonia) and non-reactive gases. Lab tested hole
geometry protects sensors from stray water droplets.
Calibration Adaptor (Part # 096-2101) – Figure 11
Delivers calibration gas directly to the sensor. Barb fitting provided for tube
connection to the calibration gas source (gas cylinder, permeation device,
generator). Note white diffuser is required and is factory installed inside
the cal adaptor hole.
Remote Duct-Mount Adaptor – Figure 12
(Part # 096-2118-6/8 (6" to 8"Duct) or
#096-2118-F ( Flat Duct )
Allows GasPlus sensor to be mounted onto round or flat exhaust or
ventilation ducts without drying out your GasPlus sensor. This adaptor will
handle flow velocities up to 1000 fpm (17fps). Available for use on flat
ducts or 6" to 8" diameter ducts (custom sizes also available). For use only
with transmitters configured for remote sensor and without junction - box.
Direct Duct-Mount Adaptor – Figure 13
(Part # 096-2714-6/8 (6" to 8"Duct) or
#096-2714-F (Flat Duct )
Same as above except PVC parts replaced with Noryl parts. Used only with
transmitters mounted directly to duct and without the need for remote
cable.
Figure 11 Calibration
Adaptor
Figure 13 Direct Duct
Mount Adaptor
Figure 12 Remote
Duct Adaptor
Flowcell-Noryl
(P/N 096-2669)
Flowcell- PVC &
Viton
TM
(P/N 096-2102)
Note: The PVC &
Viton
TM
Flowcell is
used for remote
sensor
installations only.
Used in sample draw configurations. Flowrate of
250 to 1000 cc/min. with a recommended flowrate
of 500 cc/min.. It is important the flowrate be the
same flowrate as that of the calibration gas. Wetted
materials are Viton
TM
, Noryl
TM
, and PVC.
Freedom 5000 Universal Analog Toxic Gas Detector
Instruction Manual