Travel Document Reader User Guide
DT-01715C
© 3M 2006 All rights reserved.
18
3.
During reading, the document must lie flat against the document window. The leading
edge of the booklet should be all the way to the back of the document window under the
clip. The left edge of the booklet must be against the document guide.
When the document reaches its proper position, the reader will automatically start
scanning the document.
Note:
The outer half of the booklet must lie flat against the bezel to ensure that any
chip located in the back half of the booklet is read properly.
4.
Observe the LEDs during the scanning procedure.
•
The READY LED turns off and the amber LED (BUSY) turns on.
•
The amber LED (BUSY) remains on while the reader scans and processes the
data.
•
The green LED (OK) turns on, indicating a successful read.
•
The READY LED turns on, indicating that the reader is ready to scan another
document.
The data from the document is sent to the host computer.
Summary of Contents for Full Page Reader
Page 8: ......
