Travel Document Reader User Guide
DT-01715C
© 3M 2006 All rights reserved.
22
Maintenance
The reader has no user-serviceable parts but its glass surface must be cleaned on a regular basis.
For extensive repairs, return the reader to 3M service depot.
See Return to Depot - Maintenance Procedure on page 30 for more information.
Cleaning
Clean the reader regularly to ensure proper performance.
Note:
Use a safe cloth that will not damage glass, such as the Scotch-Brite™ Microfiber
Cleaning Cloth (provided). To reorder cleaning cloths (G-00037), contact Global
Technical Services (GTS).
See Appendix D: Customer Service on page 29 for more information.
1.
Turn off the power switch.
2.
Clean the document window with a clean cloth. For stubborn dirt, use a mild glass
cleaner or a lightly dampened cloth (water).
Note:
Do not use abrasive cleaners or solvents. These may scratch the glass or
damage the plastic.
3.
Verify that there are no streaks or smudge spots remaining on the document window.
4.
Clean the body of the reader with a lightly dampened cloth (water).
5.
Turn on the power switch.
6.
Verify that the power-up self test performs correctly.
For more information, see Power-up Self Test on page 13.
Ultraviolet Tube Replacement
The UV tubes must be replaced after approximately 8000 hours of use.
Contact your GTS representative for detailed instructions.
Summary of Contents for Full Page Reader
Page 8: ......
