International - ENG
February 2021
3M-Matic
™
8000a-I / 8000a3-I - Type 11700
Page 6
44-0009-2161-7 / ECO# 0078483
3. Safety
(continued)
3.3 Table of Warnings
• To reduce the risk associated with
mechanical and electrical hazards:
- Read, understand, and follow all safety
and operating instructions before
operating or servicing the case sealer.
- Allow only properly trained and
qualified personnel to operate and
service this equipment.
Warning
• To reduce the risk associated with
pinches and entanglement hazards:
- Do not leave the machine running
while unattended.
- Turn the machine off when not in use.
- Never attempt to work on any part of
the machine, load tape, or remove
jammed boxes from the machine while
the machine is running.
Warning
• To reduce the risk associated with
pinches, entanglement and hazardous
voltage:
- Turn electrical supply off and disconnect
before performing any adjustments,
maintenance or servicing the
machine or taping heads.
Warning
• To reduce the risk associated with
hazardous voltage:
- Position electrical cord away from foot
and vehicle traffic.
Warning
Important!
Cavity in the conveyor bed.
Never put your hands inside any part
of the machine while it is working.
Serious injury may occur
(Figure 3-4)
.
Figure 3-4
Figure 3-2
Figure 3-3
Figure 3-3