International - ENG
February 2021
3M-Matic
™
8000a-I / 8000a3-I - Type 11700
Page 12
44-0009-2161-7 / ECO# 0078483
4. Specifications
4.1 Power Requirements:
Electrical – 230/400 Volt, 50 Hz., SCCR: 5kA
The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord.
Contact your 3M Representative for power requirements not listed above.
4.2 Operating Rate:
Belt speed is 0.5m/s [100 F.P.M.]
Actual production rate is dependent on operator’s dexterity.
Boxes must be 18 inches (457mm) apart minimum.
4.3 Operating Conditions
Ingress protection: IP4X. Use in an indoor dry, relatively clean environment,
50% Relative Humidity, 5o C to 40o C [40o F to 104o F],
maximum elevation of 1000 meters (3281 ft) with clean, dry boxes.
Note:
Machine should not be washed or subjected to conditions causing moisture
condensation on components.
•
To reduce the risk associated with fire and
explosion hazards:
− Do not operate this equipment in potentially
flammable or explosive environments.
Warning
