32
English
© 3M 202. All Rights Reserved.
3M™ Mobile Projector MP410
Power
Select and press to activate power settings. The power menu provides the following
options:
Power Saving
Select
Off
to disable Power Saving mode. By default, the projector is set to enter
power saving mode after 120 minutes of no activity. A warning message appears on
screen showing a 60 seconds countdown before switching to power saving mode.
Press any button during the countdown period to stop the power-saving mode.
You can also set a different delay period to enter power saving mode. The delay
period is the time you want the projector to wait without an input signal. Power saving
can be set to
30
,
60
,
90
, or
120
minutes. If an input signal is not detected during the
delay period, the projector turns off. To turn on the projector, press the
Power
button.
LED Mode
Allows you to select between
Normal
or
ECO
mode. Normal mode operates at full
power level. ECO mode operates at a lower power level which may provide longer
LED life, quieter operation, and dimmer luminance output on the screen.
Projector Mode
Allows you to select the projector mode, depending upon how the projector is
mounted.
Front: This is the default option.
Rear: The projector reverses the image so that you can project from behind a
translucent screen.
Front Ceiling: The projector turns the image upside down for ceiling-mounted
projection.
Rear Ceiling: The projector reverses and turns the image upside down. You can
project from behind a translucent screen with a ceiling-mounted projection.
Summary of Contents for MP410
Page 1: ...User s Manual ...