TECHNICAL DATA
POWER
Powered by a rechargeable Li-ion battery pack (ACK081).
3.7 V, 1800 mAh
OPERATING TIME
Expected operating time (according to
standardized measurement) in room temperature
with ACK081
WS
TM
LiteCom Plus: Approximately 18 hours
LiteCom Plus: Approximately 20 hours.
EXTERNAL INPUT
3M™ PELTOR™ Type J111-A
4-pole connector for external equipment
RADIO
Frequency range
FRS: 462.56250- 467.71250 MHz
*Bluetooth
®:
2402-2480 MHz
Operation mode
Half-duplex
Antenna
¼ wave, integrated whip antenna
Fixed to the headset
Omni directional
Gain: 0 dBi
Bluetooth
®
:
PCB antenna
Gain: 0 dBi
Channels
22 channels
Channel raster
12.5 kHz
Channel spacing
12.5 kHz
Modulation
Analog: Max narrow 2.5 kHz (FM)
Receiver sensitivity
Typical -120 dBm
Output power Bluetooth
®
2.5 mW ERP
Output power
High power: 150 mW ERP.
Low power: 25 mW ERP
EXTERNAL INTERFACE PIN OUT
Pin 1
EXTERNAL PTT
Activated when shorted to Pin 2 (ground)
Pin 2
GROUND
Pin 3
INPUT
The input signal is mixed with the WS™ WS LiteCom Plus Headset
audio output level (speaker output).
120.5 mV = Input signal level for which the mean plus one standard
deviation equals 82 dB(A) in cup.
Pin 4
BOOM MICROPHONE OUTPUT
Applied signal at the boom microphone input comes out on pin 4
2.25 mV Microphone input = 30 mV output
* Only WS
TM
(Bluetooth
®
) models
