8
2. Fully seat the eartip at the base of the eartip stem.
3. Repeat for the second earpiece.
10.2. CONNECT THE HEADSET TO THE
SCU
Align and connect the headset connector to the socket in the SCU.
Observe that the connector must be inserted so the keys fit,
(a) and (b).
a
b
10.3. ATTACH THE SCU
The SCU (1) is to be placed somewhere within the chest area.
Preferably fixed to clothing by means of the clip on the back of
the SCU.
Position the headset cable on your left or right shoulder until fitting
of the earplug begins. See chapter 10.4. FIT THE EARPLUGS
AND ADJUST EARHOOKS.
1
10.4. FIT THE EARPLUGS AND ADJUST
EARHOOKS
NOTE:
Make sure the eartips are clean and without damage before
inserting them into the ear canal.
1. Select a proper eartip size for your ear canal. Refer to chapter
10.1. PREPARE THE EARPLUGS on page 7.
2. Hold the earplugs so the cables are positioned on one of your
shoulders as shown in the illustration below.
3. Grab the left and right earplugs with the corresponding hand
and then place them on the left and right shoulder,
respectively, so the cable slider and cable clip are positioned
behind your neck.
EN
FP3881REVA_6sidedcover_32sidedinserts_4 x 6_2022-08-24.indd 8
FP3881REVA_6sidedcover_32sidedinserts_4 x 6_2022-08-24.indd 8
2022-08-24 08:30:27
2022-08-24 08:30:27
