5
Remove the batteries when storing the hearing protector for a long time.
Storing in damp environments
During long hours of use, the attenuating foam in the shells can become damp, which
may cause damage to the circuits.
For the helmet attachment:
(E:1)
Remove the hygiene kit and let the foam dry by placing the headset in a posi
-
tion that allows ventilation.
(E:2)
Do not store the hearing protectors pressed against the helmet.
For the collapsible headband:
(E:3)
Tilt the shells outwards to allow the attenuation cushions and electronics to
dry
CARE (F)
CLEANING
Clean/disinfect the cups, headband and ear cushions regularly with soap and warm
water.
Note: Do not immerse the cups in water!
REPLACING THE BATTERIES
Undo the screw and open the battery cover. Insert two 1.5-V AA batteries. Check
that the positive and negative terminals on the batteries are correctly positioned
(See diagram on cover)
Remove the batteries when storing the hearing protector for a long time. Check the
function of the unit after replacing the batteries.
REMOVING/REPLACING THE EAR CUSHIONS
Insert your fingers under the edge of the ear cushion and pull straight out
Insert the new ear cushion by pressing it in until it snaps in place
SPARE PARTS/ACCESSORIES (G)
Hygiene kit – HY79
Easy-to-replace hygiene kit consisting of two attenuation cushions and snap-in ear
cushions. Replace at least twice a year to ensure constant attenuation, hygiene and
comfort.
Clean – single-use protectors – HY100
Hygienic single-use protector that is easy to apply to the ear cushions.
Packages of 100 pairs.
CONNECTOR CORDS
FL6H
3.5 mm mono connector
FL6M
2.5 mm mono connector
FL6N
3.5 mm stereo connector for Micman com radio
Connector cords of cold and wear-resistant polyurethane for connection to a com
radio etc. Length 110 cm.
Cord for the Flex headset – FL6U-**
Available in several versions, for example the FL6U-32, which fits the Motorola
GP340. The one for your particular radio is listed on the cord’s package. Make sure
you have chosen the right cord for your radio. If you are unsure which cord to choose,
ask your Peltor dealer.
WIND PROTECTION – M60/2
Wind protection for the microphones. Packages of 1 pairs.
Summary of Contents for PELTOR Tactical XP
Page 2: ...1a 2 3 4 9 7 8 8 6 1c 1b A 1e 1f 1d 5...
Page 11: ...B 4 A 85 dB A H M L C C 1 C 2 C 3 C 4 C 5 C 6 C 7 C 8 C 9 C 10 C 11 C 12 C 13 D 2 balance BG...
Page 85: ...82 B 4 85 H M L C C 1 C 2 C 3 C 4 C 5 C 6 C 7 C 8 9 10 C 11 12 C 13 D 2 balance RU...
Page 104: ...FP 3588 Ver 2 Borsteler Chaussee 49 22453 Hamburg Tel 040 500 580 20 www comhead de...
