80-6111-841-1
3.2 Place the bell end of the mix nozzle over the cartridge
outlet. Press firmly to seat the nozzle.
Press firmly
3.3 Thread the nut assembly clockwise onto the cartridge
outlet and tighten securely.
4.0 Install Cartridge In Applicator
4.1 Before installing cartridges into gun, hold gun in a
vertical position pointing in a safe direction away from
yourself and other personnel. This will reduce the chance
of material drooling into the mixer bell housing causing
premature cure of material in mixer.
4.2 Place the large end of the cartridge assembly (piston
seal end) over the two ejector plates of the applicator,
pushing the cartridge assembly towards the air cylinder,
snapping the cartridge into place. Ensure that the
cartridge assembly is properly seated in cradle of gun
and ejector plates and rod assembly are properly aligned
in applicator.
Press down,
then in