Page 18 of 24
P/N 595278-01 Rev B 2/18
5. Thread the cover clockwise onto the end of the handle. Turn the cover
until it stops. The sides of the cover will align with the sides of the handle.
See FIGURE 8.
6. Test the operation of the Hand Held Receiver according to the REGULAR
OPERATIONAL INSPECTION section of this instruction.
NOTE
THE HAND HELD RECEIVER WILL NOT OPERATE IF THE BATTERY IS NOT
PROPERLY INSTALLED. IF THE HAND HELD RECEIVER WILL NOT OPER
-
ATE OR IF THE BATTERY COVER WILL NOT FIT AS DESCRIBED, VERIFY
THAT THE BATTERY IS PROPERLY ORIENTED.
WARNING
FAILURE TO REGULARLY INSPECT THE COMPO-
NENTS AS DESCRIBED IN THIS INSTRUCTION OR
FAILURE TO CORRECT DAMAGE TO THE ELEC-
TRONIC COMPONENTS MAY IMPAIR THE SAFETY
OF THE UNIT. THE INSTALLATION OF INCORRECT
BATTERIES OR SUBSTITUTION OF ANY OTHER
COMPONENTS MAY IMPAIR THE SAFETY OF THE
UNIT. ANYTHING WHICH IMPAIRS THE SAFETY OF
THE UNIT MAY CAUSE A MALFUNCTION, WHICH
COULD RESULT IN SERIOUS INJURY OR DEATH.
FIGURE 8
SIDES OF
COVER WILL
ALIGN WITH
SIDES OF
HANDLE
WARNING
IF THE BATTERY DOES NOT FIT OR OPERATE
AS DESCRIBED IN THESE INSTRUCTIONS, DO
NOT USE THE BATTERY. USE OF A DEFECTIVE
BATTERY MAY RESULT IN A MALFUNCTIONING
HAND HELD RECEIVER, WHICH COULD LEAD TO
SERIOUS INJURY OR DEATH.
WARNING
BATTERIES MUST ONLY BE CHANGED IN AN AREA
KNOWN TO BE NONFLAMMABLE. CHANGING THE
BATTERIES IN A FLAMMABLE ATMOSPHERE MAY
CAUSE AN IGNITION, WHICH COULD RESULT IN
SERIOUS INJURY OR DEATH.
WARNING
USE ONLY BATTERIES OF THE TYPE LISTED.
DO NOT MIX OLD AND NEW BATTERIES OR
BATTERIES FROM DIFFERENT MANUFACTUR-
ERS. USE OF BATTERIES OTHER THAN THOSE
SPECIFICALLY LISTED WILL VOID THE INTRINSIC
SAFETY APPROVAL AND MAY LEAD TO A FIRE OR
EXPLOSION, WHICH COULD RESULT IN SERIOUS
INJURY OR DEATH.
BATTERY REPLACEMENT FOR THE PAK-ALERT DISTRESS
ALARM
Refer to the BATTERY REPLACEMENT section of the user instructions provided
with the PAK-ALERT distress alarm equipped with the PAK-TRACKER Locator
System for details of battery replacement.
