background image

12

LIMITED WARRANTY

Product Use: 

Many factors beyond 3M’s control and uniquely within user’s knowledge and 

control can affect the use and performance of a 3M product in a particular application. Given 
the variety of factors that can affect the use and performance of a 3M product, user is solely 
responsible for evaluating the 3M product and determining whether it is fit for a particular 
purpose and suitable for user’s method of application.  

Warranty, Limited Remedy, and Disclaimer:

 3M warrants that this product (excluding filter 

cartridge or filter membrane) will be free from defects in material and manufacture for the 
period of (1) year from the date of purchase. The filter cartridge or membrane is warranted to 
be free from defects in material and manufacture for one (1) year. No warranty is given as to 
the service life of any filter cartridge or membrane as it will vary with local water conditions 
and water consumption. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS 
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY 
OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. This 
warranty does not cover labor.  If the 3M product does not conform to this warranty, then the 
sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the 
purchase price.  
This warranty gives you specific legal rights, and you may have other rights which may vary from 
state to state, or country to country. For any warranty questions, please call 866.990.9785 or 
mail your request to: Warranty Claims, 3M Purification Inc., 400 Research Parkway, Meriden, CT 
06450. Proof of purchase (original sales receipt) must accompany the warranty claim, along with 
a complete description of the Product, model number and alleged defect.

Limitation of Liability: 

 Except where prohibited by law, 3M will not be liable for any loss 

or damage arising from the 3M product, whether direct, indirect, special, incidental or 
consequential, regardless of the legal theory asserted, including warranty, contract, negligence or 
strict liability.

Summary of Contents for SGLP100-CL

















Reviews: