background image

 

3M, Volition, VF-45

TM

, and the “dot wave” symbol are trademarks of 3M 

 

Important Notice 

Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and 
liability associated with such use. 
 

Warranty; Limited Remedy; Limited Liability 

This product will be free from defects in material and manufacture for a period of one year from the date of purchase. 3M MAKES NO 
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive 
remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. 

Except where 

prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, 
incidental or consequential regardless of the legal theory asserted.

 

3

3

3

3    

    

Telecommunications 

6801 River Place Blvd. 

 

Austin, TX 78726-9000 
800/695-0447 
www.3m.com/volition/

 

© 3M IPC 2001

Summary of Contents for Volition VOL-N100VF+TX

















Reviews: