NS800 SPECTROPHOTOMETER OPERATING MANUAL
15
Click “D65”, it will enter “Light Source” interface as shown in Figure 19. You
can set the light source of the current standard.
Click “10”, you can switch the observer angle between 2° and 10°.
Click “LAB”, it will enter “Color Space” interface as shown in Figure 22. You
can change the color space of the current standard.
5.1.2 Check Spectral Reflectance Curve
Under standard or sample measurement interface, click “ ” to switch to next page.
It will display the spectral reflectance curve. Click “ ”, it will display
wavelength data and reflectance data of next wave band. Click “ ”, it will display
wavelength data and reflectance data of previous wave band. You can check the
spectral reflectance curve of difference standards or samples by clicking “↑”and
“↓” at the bottom of the screen.
Figure 14 Spectral Reflectance Curve of Standard Record
