7
(1) Single angle measurement in Basic Mode: e.g.: 60°. Press “Test” button will
measure the gloss value under 60°, as shown in figure 8.
Basic
Mode
T005
16:35 2015.10.23
60
T001
T002
T003
T004
T005
T102316
T102316
T102316
T102316
T102316
21.5
24.8
31.5
42.9
66.3
Delete
Menu
Figure 8 Single angle measurement under Basic Mode
60
°
Remarks: This icon
in single angle gloss
meter will only show
o n e a n g l e a n d
c a n n o t c l i c k f o r
selection.
Click “Basic Mode” at the top of the interface. It will enter average
measurement interface directly.
“T005” at the upper left means the record number of current measurement. The
number begins with letter “T”. The icon ( )is a shortcut key for angle
selection. (Remarks: Single gloss meter doesn't have this option.) “16:33” and
“2015.10.23” are time and date.
“T001-T005” is the record number of five measurements.
“T102316” is a default name of measuring record. It is making up of
“T”+”month”+”day”, “T” means basic record, “102316” means the measuring
record at16:00 pm on 23th October.
Click any name. It will pop up a dialog box with two options “Delete Record” and
“Edit Name” as shown in figure 9. If click “Delete Record”, it will display a
warning interface as shown in figure 22. Click “Ok”, this record will be deleted.
If click “Edit Name”, you can modify the name with maximum eight-bit
character (only numbers or letters) as shown in figure 23.
Click “Delete” at lower-left corner to delete the current record.
“60°” means the current measurement is under angle 60°.
The last record “66.3” in yellow is the current test data.
Click “Menu” at lower-right corner to enter the main menu interface.
Summary of Contents for YG Series
Page 1: ...60 20 60 85 V2 0 OPERATION MANUAL...
Page 32: ......
