4
Figure 5 Sub-menu Interface for Calibration
Back
Calibrate
OK
Calibrate
Change
cal
.
values
2.2 Calibration
In figure 3, click “Menu” to get into main menu as shown in figure 4.
Select “Calibration” to enter into Calibration interface as shown in figure 5.
Data
Mode
Parameter
Angle
USB
comm Tolerance
Calibrate
Setting
OK
B
ack
Figure 4 Main Menu
Remarks: Single angle
gloss meter doesn't have
angle selection option.
The substitute option is
b a s i c m o d e a v e r a g e
measurement.
Average
2.2.1 Calibration
Click “Calibrate”, it will remind you to put away the calibration plate. Make sure
the calibration plate is installed well on the instrument. Click “OK” or press
measure button to start calibration.
When operating environment change (such as the rapid change of
temperature, altitude and humidity), it must do calibration. In order to ensure
the accuracy, please use the original standard plate for calibration. The dust on
the standard plate will affect calibration accuracy. Please clean the standard
Summary of Contents for YG Series
Page 1: ...60 20 60 85 V2 0 OPERATION MANUAL...
Page 32: ......