16
Please follow the steps below to skip AUTO.BAS:
1. Turn off the power.
2. Hold down the feed button and turn on the power. At this point, the power indicator color
will cycle as follows:
Indicator color cycle mode:
Purple
Blue
Red (blink 5 times)
Purple (blink 5 times)
Blue (blink 5 times)
Blue (fixed)
3. Release the FEED button when the indicator is fixed blue.
4. The printer will skip the AUTO.BAS program.
V. Diagnostic Tool
Diagnostic Tool is an easy-to-use window-type utility program that allows you to check the current
status and settings of the printer, download graphic files, programs, font files, etc., and complete
firmware updates according to the actual need. Moreover, it supports creation and download of
dot-matrix fonts, transmission of commands or files and so on. By using it, you can complete the
printer setup, check the printer status and troubleshoot the printer usage problems more easily.