16
4.3.4
Skip the AUTO.BAS program
The TSPL2 command language allows the user to load an auto-execute file (AUTO.BAS) into
the flash memory. When the printer is turned on, it will be automatically executed according to
the file loaded by the user. When you want to skip the AUTO.BAS after power-on, you can use
this boot function to ignore this auto-execute file.
Please follow the steps below to skip AUTO.BAS:
1.
Turn off the power.
2.
Hold down the feed button and turn on the power. At this point, the power indicator color
will cycle as follows:
◼
Indicator color cycle mode:
Purple
→
Blue
→
Red (blink 5 times)
→
Purple (blink 5 times)
→
Blue (blink 5 times)
→
Blue (fixed)
3.
Release the FEED button when the indicator is fixed blue.
4.
The printer will skip the AUTO.BAS program.
