PTA0010 User Manual
Important Safety Information
•
Please read these safety instructions carefully.
•
Keep this user manual for later reference.
•
Before turning on the machine, please make sure that all electric power meets the
requirements, (such as the electrical pressure and frequency), and that your electrical
outlet is connected to the ground.
•
Thunder can hurt this product, even your personal security, so please pull out the network
cable, electrical cable and others connecting external on the thunder days.
•
In the circumstance that the power system hasn’t been cut off, please do not plug in and
out any components and connections (except for USB device).
•
non-experts or non-authorized persons please don’t open machine shell.
•
Please do not put terminal together with disk, credit card or other metallic objects,
otherwise information stored in the disk and credit card may be affected.
•
LCD screens and cameras are fragile components, please keep them well. And please keep
the terminal from strike and strong extrusion.
•
Please do not spatter liquid into the terminal and its accessories, as well as to not leave
them in a damp environment.
•
Please do not place the terminal in the environment with too high or too low
temperature.
•
If the machine makes abnormal noise, sends out burnt smell or discharges smoke,
immediately shut off power, unplug the power plug and contact the service center.
Otherwise, it may cause fire or an electric shock.
•
Please do not allow children to climb onto the product, otherwise the product might fall
and cause personal injury.
•
Please lay this product packed in the 10-35
℃
environment for at least 2 hours before
turning on if it was stored in less than 10
℃
temperature environment, thus avoiding the
hurt on PC due to a big change of environmental temperature.
•
All external devices’ power consumption should be less than 1.5A.
Important Note
For program, user manual and other information, please visit the website:
http://
www.3nStar.com
to download or consult.
