7
5
Chapter five Charger
Due to the battery in the factory has only a small amount of electricity used for test,
when you receive the machine you must charging before use. Connect the device to
the adapter for charging directly. At the same time, the New 3NSTAR RUGGED
TABLEseries also have optional base for charging.
5.1
Charging time
Battery: through the adapter, the battery’s first charge time is about 5 hours, the
LED lamp shows red represents charging, power is full when it is green.
5.2
Charging temperature
§
The best operating temperature is room temperature 18~25
0
C.
§
The battery will not charge if the temperature less than-20
0
C or more than 50
0
C.
5.3
Battery power supply
§
If you turn on the wireless network service or data acquisition program, the
battery power will be substantial loss. Please turn off these procedures to save
electricity when these functions are not required.
§
In order to avoid the battery power shortage, it is recommended that you work
with a battery of electric power, or connect the external power supply.
Tip: if you do not use the product for a long time, please charge at least once every
two months.
5.4
Attentions for using batteries
§
If the battery is depleted, it may not be immediately switched on, which is a
normal phenomenon. Please continue charging for a while before turning on
devices.
Summary of Contents for TR0702A
