IPS7110-2GC-8POE
Managed Industrial Ethernet Switch
Quick Installation Guide
3onedata Co., Ltd.
Address:
3/B, Zone 1, Baiwangxin High Technology
Industrial
Park,
Xili,
Nanshan
District,
Shenzhen
Website:
www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【
Package Checklist
】
Please check whether the package and accessories are intact
while using the switch for the first time.
1.
Industrial Ethernet switch
2.
Certification
3.
Quick installation guide
4.
Warranty card
5.
DIN-Rail mounting attachment
6.
CD
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【
Product Overview
】
The product is managed DIN-Rail industrial POE Ethernet
switch. Model as follows: IPS7110-2GC-8POE (2 Gigabit
Combo ports + 8 100M POE ports).
【
Panel Design
】
Top view, Bottom view and Rear view
Front view and Side view
1.
Power input terminal block
2.
Relay alarm output terminal block
3.
DIP switch
4.
Console port
5.
Grounding screw
6.
DIN-Rail mounting kit
7.
Device running indicator RUN
8.
Relay alarm indicator ALM
9.
Power supply input status indicator P1/P2
10.
POE indicator
11.
100M POE copper port
12.
100M interface connection indicator
13.
Gigabit SFP slot of Combo port
14.
Gigabit copper port of Combo port
15.
Gigabit Combo port connection indicator
【
Mounting Dimension
】
Unit: mm
Note:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
【
DIN-Rail Mounting
】
The product adopts 35mm standard DIN-Rail mounting, which
is suitable for most of the industrial scenes. Mounting steps as
below:
