ICS5000-E24GP4GS
Layer 2 Managed Industrial
Ethernet PoE Switch
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Xili, Nanshan District, Shenzhen
Website: www.3onedata.com
Tel: +86 0755-26702688
Fax: +86 0755-26703485
【
Package Checklist
】
Please check the integrity of package and accessories while
first using the switch.
1. Industrial Ethernet switch
2. Install components
3. Power line
4. Warranty card
5.
Certificate
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【
Product Overview
】
This product is a 28-port Gigabit layer 3 TSN industrial
Ethernet switch, and its model is: ICS5000-E24GP4GS (24
Gigabit PoE ports + 4 Gigabit SFP slots, 100~240VAC
power input).
【
Panel Design
】
Front view
Rear View
1. LED indicator
2. Restore default settings RESET
3. 10/100/1000Base-T(X) Gigabit PoE copper port
4. 1000Base-X Gigabit SFP slot
5. CONSOLE port
6. Grounding screw
7. Terminal blocks for 100~240VAC AC power supply
input
【
Mounting Dimension
】
Unit: mm
Notice Before Mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 10%~90% without
condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging
the device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
【
Desktop Mounting
】
When the switch is installed on a stable desktop. Please
install the attached rubber foot pads on the four corners of
the bottom of the switch, and then place them at the
designated positions on the desktop, leaving enough
ventilation space for the switch to dissipate heat.
【
Rack Mounting
】
This product adopts rack-mounting, mounting steps as
below:
Step 1
Select the device mounting location to ensure
enough size.
Step 2
Adopt 4 bolts to install the mounting lugs in the
device position as figure below.
Step 3
Place the device in the rack; adopt 4 bolts to fix
two sides mounting lugs in the rack.
