IES318 Series
Unmanaged Industrial Ethernet
Switch Quick Installation Guide
3onedata Co., Ltd.
Address:
3/B, Zone 1, Baiwangxin High Technology
Industrial
Park,
Xili,
Nanshan
District,
Shenzhen
Website:
www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【
Package Checklist
】
Please check whether the package and accessories are intact
while using the switch for the first time.
1.
Industrial Ethernet switch
2.
Certification
3.
Quick installation guide
4.
Warranty card
5.
DIN-Rail mounting attachment
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【
Product Overview
】
This series are plug-and-play unmanaged industrial Ethernet
switches. Models as follows:
Model I. IES318 (8 100M copper ports)
Model II. IES318-1F (7 100M copper ports + 1 100M fiber
port)
Model III. IES318-2F (6 100M copper ports + 2 100M fiber
ports)
【
Panel Design
】
Top view, Bottom view and Rear view
Front view
Model I Model II Model III
1.
DIP switch
2.
Power input terminal block
3.
Relay alarm output terminal block
4.
Grounding screw
5.
Wall-mounted location hole
6.
DIN-Rail mounting kit
7.
Power input status indicator P1/P2
8.
Device running indicator RUN
9.
Relay alarm indicator ALM
10.
Ethernet port status indicator
11.
10/100Base-T(X) Ethernet copper port
12.
100Base-FX Ethernet fiber port
【
Mounting Dimension
】
Unit: mm
Attention before mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
【
DIN-Rail Mounting
】
For convenient usage in industrial environments, the product
adopts 35mm DIN-Rail mounting, mounting steps as below:
